Latest version of CISPR 12, Edition 6.1 requires radiated emissions tests from 30 MHz to 1000 MHz. The standard defines emissions test setups and list required equipments and test sites. We are offering turn-key CISPR 12 test setup solutions. We are making CISPR 12 test setups easy to reach. We combined Radiated Emissions Test Systems and ALSE/OTS test sites and offering as CISPR 12 Test Systems. All in one, complete solution. You can either perform pre-compliance EMC tests or full-compliance EMC tests of the vehicles.

About CISPR 12

This standard is published by IEC and used for electromagnetic compatibility compliance of vehicles and boats. The limits in this international standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this standard may not provide adequate protection for new types of radio transmissions or receivers used in the residential environment nearer than 10 m to the vehicle, boat or device.

This standard applies to the emission of electromagnetic energy which may cause interference to radio reception and which is emitted from

a) vehicles propelled by an internal combustion engine, electrical means or both,

b) boats propelled by an internal combustion engine, electrical means or both. Boats are to be tested in the same manner as vehicles except where they have unique characteristics as explicitly stated in this standard,

c) devices equipped with internal combustion engines or traction batteries,

CISPR 12 is not a open access standard. You have to purchase it from IEC webstore or from a national standard institute. You can reach a preview of the CISPR 12:2007+AMD1:2009 (Edition 6.1) by clicking here. CISPR 12 is expected to be updated in 2023. As IEC informed on the standard page, forecast date of this new edition (Edition 7.0) is 26 November 2023. New edition might change some test parameters. When CISPR 12:2023 is published we will also update our CISPR 12 test systems. As mentioned on CISPR 12:2007+AMD1:2009:

Experience has shown that compliance with this standard may provide satisfactory protection for receivers of other types of transmissions when used in the residential environment, including radio transmissions in frequency ranges other than that specified.

What we offer

Testups offers turn-key test system solutions for CISPR 12 compliance of vehicles. Testups offer Pre-compliance EMC Test Systems and Full-compliance EMC Test Systems for CISPR 12 compliance. Measuring receiver,  RF cables, antennas, test sites (ALSE or OTS) are offered with different configurations to fulfil your CISPR 12 requirements. We are able to build your new CISPR 12 test laboratory. 

• Pre-compliance Radiated Emissions Test System (without test site),
• Pre-compliance Radiated Emissions Test System (with ALSE or OTS),
• Full-compliance Radiated Emissions Test System (without test site),
• Full-compliance Radiated Emissions Test Systems (with ALSE or OTS)

are the four main product category we offer. Your vehicle’s features and CISPR 12 requirements define the system that we will offer you. To offer above test systems, we are collaborating with test equipment and test site manufacturers. The equipments and test sites we offer can be verified and certified by third party and accredited calibration laboratories. Pre-compliance test systems are more economic when compared to full-compliance test systems. 

CISPR 12 compliant

* Spectrum Analyser / Scanning Receiver / EMI Receiver,

* High Quality Double Shielded Coaxial RF cable,

* Biconical Antenna,

* Log-Periodic Antenna

The system allows you to perform radiated emissions tests between 30 MHz and 1000 MHz.

Options:

* Test Table & Reference Ground Plane

* Tripod / Antenna Mast

* Test Software

* IEC/ISO 17025 accredited calibration certificates

CISPR 12 compliant

* Absorber Lined Shielded Enclosure (ALSE) or Outdoor Test Site (OTS)

* Bulkhead connector,

* Honeycomb air vents,

* Lighting system.

The ALSE / OTS allows you to create a test environment for radiated emissions tests between 30 MHz and 1 GHz.

Options:

* Shielded Enclosure / Control Room

* Video/Camera Monitoring System

* Smoke Detector

* Fire Detector

* On-site Installation Service

* On-site Third-Party Validation Service of ALSE