Are you interested in EMC Tests of vehicles according to UN ECE R10?

We listed EMC test setup requirements for you.

On this page you will wind EMC test setup requirements for the EMC tests that is required for vehicles. In this guide we are listing the test setup requirements for EMC testing of vehicles according to UN ECE Regulation 10 Revision 6. Our reference document is UN ECE R10 and its latest version of Revision 6. This regulation is applicable from the UN ECE website and it is free to download. Please take into consideration of the features of the vehicle that will be tested and the revision of UN ECE R10.

What will you find on this guide? You will find these headings on the 19-page guide:

1. Vehicle Configurations
2. Charging Modes according to UN ECE R10
3. EMC Tests for Vehicles
4. EMC Test Setup Examples
5. Test Site Requirements for Radiated Emissions
6. Test Sites mentioned under UN ECE R10
7. Summary of EMC Tests for Vehicles according to UN ECE R10

This free guide issued by Testups for the automotive industry and it is regularly updated.

UN ECE R10 differentiates vehicles according to its features and configurations. There are two main features: REESS charging mode coupling and immunity related functions. These two features define the vehicle category and applicable EMC tests.

Vehicle Category	Vehicle Configuration Description
1	Vehicles in configurations other than REESS charging mode coupled to the power grid * vehicles without immunity related functions
2	Vehicles in configuration “REESS charging mode coupled to the power grid” * vehicles without immunity related functions
3	Vehicles in configurations other than REESS charging mode coupled to the power grid * vehicles with immunity related functions
4	Vehicles in configuration “REESS charging mode coupled to the power grid” * vehicles with immunity related functions

We can derive three vehicle categories in terms of EMC tests listed under UN ECE Regulation 10:

* All Vehicle categories listed under the scope of UN ECE R10
* Vehicles with immunity related functions
* Vehicles with REESS charging mode

Test / EUT	Vehicles in configurations other than REESS charging mode coupled to the power grid * vehicles without immunity related functions	Vehicles in configuration “REESS charging mode coupled to the power grid” * vehicles without immunity related functions	Vehicles in configurations other than REESS charging mode coupled to the power grid * vehicles with immunity related functions	Vehicles in configuration “REESS charging mode coupled to the power grid” * vehicles with immunity related functions
Radiated Emissions (30MHz-1GHz) Broadband (Peak, Quasi-Peak) Test Site: ALSE or OTS	Required	Required	Required	Required
Radiated Emissions (30MHz-1GHz) Narrowband (Average) Test Site: ALSE or OTS	Required	Not Required	Required	Not Required
Radiated Immunity (20MHz-2GHz) Absorber chamber test according to ISO 11451-2 Test Site: ALSE or OTS	Not Required	Not Required	Required	Required
Conducted Emissions (0.15-30MHz) for AC&DC power lines Test Site: Shielded Enclosure, ALSE or OATS	Not Required	Required	Not Required	Required
Conducted Emissions (0.15-30MHz) for wired network ports Test Site: Shielded Enclosure, ALSE or OATS	Not Required	Required	Not Required	Required
Harmonics Emissions (AC power lines) ≤ 16 A per phase (IEC 61000-3-2) > 16 A and ≤ 75 A per phase (IEC 61000-3-12)	Not Required	Required	Not Required	Required
Voltage fluctuations and Flicker Emissions (AC power lines) ≤ 16 A per phase (IEC 61000-3-3) > 16 A and ≤ 75 A per phase (IEC 61000-3-11)	Not Required	Required	Not Required	Required
EFT/Burst Immunity (IEC 61000-4-4) AC or DC power lines: ± 2 kV	Not Required	Not Required	Not Required	Required
Surge Immunity (IEC 61000-4-5) AC power lines: ± 2 kV DC power lines: ± 0.5 kV	Not Required	Not Required	Not Required	Required