HARMONICS AND FLICKER ANALYZER (IEC 61000-3-2 and IEC 61000-3-3 Test System)

Do you want to perform Harmonic Current Emissions test according to IEC/EN 61000-3-2? Or do you want to measure voltage changes, voltage fluctuations and flicker according to IEC/EN 61000-3-3? We are offering Harmonics & Flicker Analyzer that is fully compliant with the latest versions of IEC/EN 61000-3-2 and IEC/EN 61000-3-3. Fulfil your harmonics emissions, flicker and EMC requirements with standard compliant test systems including software. Perform harmonics emissions and flicker tests in house. We are delivering Harmonics and Flicker Analyzer test systems to your address in 6-8 weeks.
Contact us and get your quote:

IEC 61000-3-2 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which can be produced by equipment tested under specified conditions. This standard is applicable to electrical and electronic equipment having a rated input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems.

IEC 61000-3-3 is concerned with the limitation of voltage fluctuations and flicker impressed on the public low-voltage system. It specifies limits of voltage changes which may be produced by an equipment tested under specified conditions and gives guidance on methods of assessment. This standard is applicable to electrical and electronic equipment having an input current equal to or less than 16 A per phase, intended to be connected to public low-voltage distribution systems of between 220 V and 250 V line to neutral at 50 Hz, and not subject to conditional connection.

Harmonics emissions and flicker emissions are measured with analyzers.

What we offer?

We are offering IEC/EN 61000-3-2 and IEC/EN 61000-3-3 compliant Harmonics and Flicker Analyzers. For accurate measurements, you will also need clean power source. Send us your harmonics and flicker analyzer requirements and get quote.

AC2000A Harmonics and Flicker Analyzer has a universal and single power supply input. You can supply the instrument either with 220V AC(50Hz) or 110V AC(60Hz). The switch on power supply input shall be set properly before using. 

AC2000A Harmonics and Flicker Analyzer has three EUT power supply versions (when ordering the unit please choos one of these):

1) 220V 50Hz with UK plug (this version is generally in stock)

2) 220V 50Hz with EU (Schkuo) plug (this version is generally in stock)

3) 115V 60Hz with US plug (this version is generally not in stock, it is manufactured after a purchase order)

Harmonics and Flicker Analyzer Test System we offer (For Sale)

Order Code Product Name Description
THFTS-01 Harmonics & Flicker Analyser

The AC2000A is a Harmonics and Flicker analyser that is fully compliant with the latest versions of IEC61000-3-2  and IEC61000-3-3

Datasheet

THFTS-02 Clean Power Source

A power source that provides up to 1kW of 50Hz mains supply that meets the THD requirements of IEC61000-3-2

Datasheet

Lead time: 2-3 weeks

Harmonics and Flicker Analyzer Test System we offer (For Rental)

Order Code Product Name Description
THFTS-01 Harmonics & Flicker Analyser

The AC2000A is a Harmonics and Flicker analyser that is fully compliant with the latest versions of IEC61000-3-2  and IEC61000-3-3

Datasheet

Lead time: 1-2 weeks. Rental services are only valid for these countries: United States, United Kingdom, Canada, Ireland, Hungary and all EU member states. 

Do you want to perform IEC/EN 61000-3-2 and IEC/EN 61000-3-3 tests in house?

Contact us and get quote from us for:

* IEC/EN 61000-3-2 and IEC 61000-3-3 compliant Harmonics and Flicker Analyzer

* Clean Power Source for IEC/EN 61000-3-3

We are engineers, experts and consultants specialised in electrical product testing and certification.

With our team, laboratory and partner laboratories, we are providing testing and certification services for electrical products. We are partnering with testing laboratories located in USA, Ireland, United Kingdom, Germany, Hungary, Italy, Turkey, China, Brazil and South Africa. We are providing our services worldwide.

We are also collaborating with EMC test equipment and chamber manufacturers to provide turnkey systems and solutions to the businesses. After understanding your current requirements, we are offering best device configurations to fulfil your needs. We are delivering, installing test equipments and anechoic chambers with our partner and expert teams. When required, we are also offering on-site and remote trainings for the devices and chambers we deliver.

Our recent blog posts

DIY RF Anechoic Chamber

How to build a DIY RF Anechoic Chamber? If you have time and RF knowledge, you can try to do it yourself RF anechoic chamber. We have listed three resources for you. Check them prior to starting your own anechoic chamber.  1) ''In this project, we built a low-cost...

What are the EMC test labs needs?

We are listing common needs of electromagnetic compatibility test laboratories. Service scope extension, calibration, validation, keeping key staff and EMC knowledge in house. Maintenance and Repair Services.

Power Line EMC Filter Manufacturers

Corcom / TE Connecitivity Curtis Industries EPCOS / TDK ETS-Lindgren Murata MPE LCR Electronics Premier Filters Schaffner Tusonix / CTS  WEMCWe are offering power line EMC filters for RF shielded rooms, EMC anechoic chambers, medical and railway. The filters we offer...

Location

Testups Ireland Limited is a registered company with registration number 634977. Tax ID: 3570537IH

Registered address: 22 Northumberland Road, Ballsbridge, Dublin 4. D04 ED73 Ireland