Automotive EMC Test Equipments

(Emissions Test Systems, Immunity Test Systems, Electrical Transients Test Systems)

Do you design/manufacture vehicles or electronic components for automotive?

Do you want to perform EMC tests for automotive ?

With our automotive EMC test equipments you can perform EMC tests according to CISPR 12, CISPR 25, CISPR 36, ISO 7637-2, ISO 7637-4, ISO 16750-2, ISO 10605, IEC 61000-3-2, IEC 61000-3-12, IEC 61000-3-3, IEC 61000-3-11, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, FMC 1278, FMC 1280. 

We are offering complete solutions for electromagnetic compatibility test equipments for automotive industry.

Conducted Emissions Test System

Radiated Emissions Test System

Magnetic Field Emissions Test System

Harmonics & Flicker Test System

Antennas

Conducted Immunity / BCI Test System (ISO 11452-4)

Radiated Immunity Test System

Transient Emissions Test System

Transient Immunity Test System

ESD Generator

Contact us and send your product’s features and EMC requirements.

Standard Purpose of Standard Applied for  Test Parameters What we offer? 
CISPR 12 to protect the radio environment outside the vehicle vehicles, boats, devices equipped with internal combustion engines or traction batteries

Frequency: 30MHz to 1GHz

Measurement distance: 10m.

Detectors: Peak, QP, AVG

CISPR 12 Test System

Turn-key solution including measuring receiver, antennas, test software, and anechoic chamber. On-site installation and training is optional.

CISPR 25 to protect on-board receivers from disturbances produced by conducted and radiated emissions arising in a vehicle vehicles, boats, internal combustion engines, trailers, devices and any electronic/electrical component intended for use in vehicles, boats, trailers and devices.

Conducted Emissions Voltage/Current probe method

Radiated Emissions ALSE and Stripline methods

Frequency: 150kHz to 5,925MHz

CISPR 25 Test System

Turn-key solution including antenna measuring system, ground plane, power supply, AN Load simulator, rod antenna, biconical antenna, log-periodic antenna,  horn antenna, anechoic chamber. On-site installation and training is optional.

CISPR 36 to provide protection for off-board receivers (at 10 m distance) in the frequency range of 150 kHz to 30 MHz when used in the residential environment electric and hybrid electric vehicles that have a traction battery voltage between 100V and 1,000V Frequency: 150kHz to 30MHz

CISPR 36 Test System

Turn-key solution including measuring receiver, magnetic field receive antennas, test software, and anechoic chamber or OATS. On-site installation and training is optional.

ISO 10605 to evaluate electronic modules intended for vehicle use. It applies to discharges in the following cases: — ESD in assembly; — ESD caused by service staff; — ESD caused by occupants. electronic modules on the bench and complete vehicles

Contact discharge: 2kV to 15kV

Air discharge: 2kV to 25kV

30kV ESD Generator / Simulator

Turn-key solution including ESD Generator, ESD test bench, vertical and horizantal coupling plates (HCP and VCP) is optional. On-site installation and training is optional.

ISO 76372-2 to ensure the compatibility to conducted electrical transients of equipment installed on passenger cars and commercial vehicles fitted with 12 V or 24 V electrical systems. It describes bench tests for both the injection and measurement of transients. all types of road vehicles independent of the propulsion system (e.g. spark ignition or diesel engine, electric motor).

Immunity (Pulse #1, Pulse #2a, Pulse #2b, Pulse# 3, Pulse #4)

Emissions (Slow pulses, Fast pulses)

ISO 7637-2 Immunity Test Systems up to 200Amps

ISO 7637-2 Emissions Test Systems

ISO 11452-4 to ensure the immunity level of electronic components when they are subjected to disturbance RF signals up to 400 MHz
The bulk current injection (BCI) test method is based on current injection into the wiring harness using a current probe as a transformer where the harness forms the secondary winding.
electronic components of passenger cars and commercial vehicles regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).

BCI Test Method

(Modulated and Amplified RF signals between 1-400MHz is applied via bulk current injection probe)

ISO 11452-4 BCI Immunity Test System

If you are interested in any of above test equipments, systems contact us and get your quote. Depending on your product’s features delivery time of the EMC test equipments vary between 4 and 8 weeks.  For turn-key EMC test system solutions including on-site anechoic chamber installation services, delivery would be completed in about 3 months.

Get Quote for Automotive EMC Test Equipments or Turn-key Solutions

We are offering supply, installation, validation and instrumentation services to create fully compliant EMC test laboratories for automotive industry. Our solutions are turn-key and fulfil the requirements of standards.

  • CISPR 12, CISPR 25, CISPR 36 compliant OATS or ALSE (Worlwide installation option is available) 

  • CISPR 12, CISPR 25, CISPR 36 compliant measuring receivers, antennas, test setups and test software

  • ISO 10605 compliant ESD simulators / generators

  • ISO 7637-2 and ISO 16750-2 compliant Emissions and Immunity Test Systems

  • ISO 11451-2 and ISO 11451-4 compliant Immunity Test Systems

  • ISO 11452-4 compliant BCI Immunity Test Systems

Contact us and get a quote from us. Fill the form below with your message and send it to us. 

Email

info@testups.com