Comb Emitter Generator (915MHz to 40GHz)

Do you want to validate your EMC, RF test sites? CGE06 is a great solution between 915MHz and 40GHz. The CGE06 40 GHz Comb Emitter Generator is a broadband reference comb source producing frequencies within the 915 MHz to 40 GHz range, with two step sizes selectable by the user. The CGE06 is the ideal source for carrying out checks on fully or semi anechoic chambers and other E-field test environments. We are delivering CGE06 comb generators to your address in 6 weeks, international shipment is available.
Contact us and get your quote:

York EMC reference signal and noise sources, generators are delivered as kits, set of items.

York EMC is manufacturing reference signal and noise sources. CGE06 is the reference source between 915MHz and 40GHz.

The CGE06 is a broadband reference comb source producing frequencies within the 915 MHz to 40 GHz range, with two step sizes selectable by the user. It is the ideal reference source for carrying out checks on fully- or semi-anechoic chambers and other E-field test environments. The CGE06 is compact and can be run from a mains power adapter (supplied) or independently from the PPU01 battery pack to minimise the effect of cabling when characterising an electromagnetic environment. The generator unit is housed in a metal enclosure so that it can be mounted in direct electrical contact with a ground plane, as may be required by some tests. The comb signal allows both the reference and noise floor signal levels to be viewed simultaneously, aiding dynamic range measurements. The CGE06 is equipped with a 2.92 mm output connector to which an antenna can be fitted for generating radiating E-fields.

Features:

• 915 MHz to 40 GHz output

– Applications across a broad spectrum

• Stable output

– Repeatable measurements

• Selectable comb output frequency

– Flexibility across a range of applications

• Compact and portable

– 56 x 17.5 x 72 mm

• PPU01 battery or external power supply

– No power cable effects using the PPU01

– Continuous operation using an external power adapter

Applications:

• Conducted and radiated measurement systems validation and verification

• Investigation and characterisation of different measurement environments such as fully anechoic chambers or semi-anechoic chambers

• Reference source for:

– Daily pre-test checks as required by accreditation authorities e.g. ISO 17025

– Comparisons between test sites

– Long-term performance monitoring

– Investigation of screened room behaviour

– Cable loss measurements

• Evaluating component assembly characteristics e.g. filter loss, amplifier gain and bandwidth

• Spectrum analyser or receiver pre-checks

• Shielding evaluation

Download Datasheet of CGE06

CGE06 has two versions: CGE06KIT01 (Basic) and CGE06KIT02 (Enhanced). Here is the configuration of each kit: 

CGE06 915 MHz to 40 GHz Comb Source Kits

CGE06KIT01 Kit

Basic CGE06 915 MHz to 40 GHz conducted output reference comb source kit. Includes:

– PPU01 8 V 2 AHr battery pack

– PSU01 18 V power supply

– CAL15 (manufacturer’s test certificate showing output power,915 MHz to 40 GHz measured using a spectrum analyser, all modes)

– CD containing manual and test results

– Case

CGE06KIT02 Kit

Enhanced CGE06 915 MHz to 40 GHz conducted output reference comb source kit. Includes:

– MCN02-K 50 mm diameter monocone antenna (1 GHz to 26 GHz optimum)

– PPU01 8 V, 2 AHr battery pack

– PSU01 18 V power supply

– CAL15 (manufacturer’s test certificate showing output power from 915 MHz to 40 GHz measured using a spectrum analyser, all modes)

– CD containing manual and test results

– Case

Accessories
MCN02-K 50 mm diameter monocone antenna, K-connector (1 GHz to 26 GHz optimum)
PPU01 8 V, 2 Ahr rechargeable battery pack
PSU01 18 V mains power adapter
Services
Additional Calibrations to be supplied with a new kit
Recalibrations
Hire (CGE06KIT02 2 week hire)
Repairs (Repair and recalibration CAL15)

Notes:

  1. Warranty: 24 months 
  2. Payment terms: 100% in advance before the delivery
  3. Delivery Period: 6 weeks
  4. Testups is an authorized distributor of listed products.
  5. Calibration: Manufacturer calibration certificates are default and free of charge. Additional third party calibration certificates are available with additional fee and timinig. Additional calibration services are provided by the calibration laboratory which is accredited by UKAS according to ISO/IEC/EN 17025.
  6. CGE06 kits are manufactured in United Kingdom. Shipments are from United Kingdom.

Are you interested in any of CGE06KIT01, CGE06KIT02 or any other reference source, you can either ask a quotation from us or buy online by using below buttons. To ask quote, just contact us by sending an email to info(at)testups.com or visiting our Contact Us page.

 

Ask Quotation for a reference source or generator

Fulfil requirements of your measurement and test setups. Verify your test equipments with generators. We are distributing York EMC products. Get Quote from Testups. Lead time of reference sources would be within 4-6 weeks after a purchase order.

Buy CGE06KIT01 Online

CGE06KIT01 Basic CGE06 915 MHz to 40 GHz conducted output reference comb source kit. Includes:

– CGE06 reference source

– PPU01 8 V 2 AHr battery pack

– PSU01 18 V power supply

– CAL15 (manufacturer’s test certificate showing output power,915 MHz to 40 GHz measured using a spectrum analyser, all modes)

– CD containing manual and test results

– Case

Buy CGE06KIT02 Online

CGE06KIT02 Enhanced CGE06 915 MHz to 40 GHz conducted output reference comb source kit. Includes:

– CGE06 Reference Source

– MCN02-K 50 mm diameter monocone antenna (1 GHz to 26 GHz optimum)

– PPU01 8 V, 2 AHr battery pack

– PSU01 18 V power supply

– CAL15 (manufacturer’s test certificate showing output power from 915 MHz to 40 GHz measured using a spectrum analyser, all modes)

– CD containing manual and test results

– Case

We are engineers, experts and consultants specialised in electrical product testing and certification.

With our team, laboratory and partner laboratories, we are providing testing and certification services for electrical products. We are partnering with testing laboratories located in USA, Ireland, United Kingdom, Germany, Hungary, Italy, Turkey, China, Brazil and South Africa. We are providing our services worldwide.

We are also collaborating with EMC test equipment and chamber manufacturers to provide turnkey systems and solutions to the businesses. After understanding your current requirements, we are offering best device configurations to fulfil your needs. We are delivering, installing test equipments and anechoic chambers with our partner and expert teams. When required, we are also offering on-site and remote trainings for the devices and chambers we deliver.

Our recent blog posts

7 EMC Tests for Electric Vehicles

Radiated Emissions, Radiated Immunity, Conducted Emissions, Harmonics Emissions, Flicker Emissions, EFT/Burst Immunity, Surge Immunity are 7 EMC tests applicable for electric vehicles according to UN ECE Regulation 10 (Revision 6). Testups is offering ECE R10 and EMC test systems, products and services.

Location

Testups Ireland Limited is a registered company with registration number 634977. Tax ID: 3570537IH

Registered address: 22 Northumberland Road, Ballsbridge, Dublin 4. D04 ED73 Ireland